Product Feature:
Archana Oil Resistant conveyor belts are manufactured using specially formulated rubber compounds. They are suitable for transporting a very wide range of materials which are coated with oil or may have traces of it.
Few applications demand a certain degree of resistance to oil. The general purpose conveyor belts are designed to withstand abrasion and wear, however they are not designed to withstand a higher level of oil resistance. This results in the swelling of cover when they come into contact with petroleum based oils, greases, animal or vegetable fats, etc. The resultant swelling of the rubber leads to failure of the belt due to reverse troughing, joint separation or cover delamination.
To address this challenge, we offer a large range of Oil Resistant belts in the industry which can be customised to suit individual industry needs.
- They have a high degree of chemical resistance.
- They have unique properties to prevent material build up.
- They can be designed to convey oily materials, thereby resulting in higher belt life.
- The occurrence of reverse troughing of belts can be eliminated.
- Metal turnings
- Hot asphalt/ Hot mix plants
- Scrap recycling and compost handling
- Coated fertiliser products
- Refineries for handling pet coke
- Soya and grain handling facilities
|
CONSTRUCTIONAL FEATURES |
|
|
Width |
Up to 1500 mm |
|
Length |
As per requirement |
|
Ends |
Open or Endless |
|
Edge |
Cut or Moulded Edge |
|
Fabric Plies |
1 ply to 7 ply |
|
Carcass Construction |
EP/NN/PP |
|
Cover Thickness |
1.5 mm to 250 mm |
|
Cover Grades |
Refer the chart |
|
Common Belt Rating |
200 to 3150 kN/m |
|
Splicing Method |
Hot/Cold/Mechanical |
|
Cover Type |
Standard/ Grade |
Minimum Tensile Strength |
Minimum Elongation at Break (%) |
Maximum Swelling in Fuel B (%) |
Reference Material |
|
High Oil Resistant |
AR-HiOR |
15 |
350 |
35 |
Convey materials like Crude petroleum, oil coated products, oil coated products, etc. |
|
Oil Resistant |
AR-OR IS-OR, AS-Z, DIN-G |
12.5 |
350 |
70 |
Materials like light oil coated sand, food grains, oil-seeds, etc. |
|
Moderate Oil Resistant |
AR-MOR |
12.5 |
350 |
110 |
Materials like oil seeds, wood chips, vegetable oil coated products, etc. |
|
Oil and Heat Resistant |
AR-SOR-HR |
12 |
300 |
70 |
Heat resistant up to 125°C, used for hot asphalt handling |
|
High Heat and Oil Resistant |
AR-SHR-SOR |
12 |
300 |
55 |
Moderate heat resistant up to 100°C, for handling tar coated material |
|
Oil Resistant and High Abrasion |
AR-OR-HAR |
12 |
300 |
60 |
High wear resistant meant for |
|
Oil, Heat and Fire Resistant |
AR-OR-HR-FR |
12 |
300 |
60 |
|